Clock was shipped without weights, pendulum, and top.
clock repacked with new movement, hands, and spare parts.
Clocks original movement rebuilt (customer did not want the new, previously installed movement used) $229
This required replacing lever spring, crutch, lift levers. ($19)
Fit and install new hands. ($7)
***Upon taking the new movement out of the case (customer didn’t want) it was found that 3 of the 4 mounting points inside the case were previously poorly repaired.
Remove old mounting points, fabricate new ones, and install.
**When installing movement it was recognized that the mounting feet were bent and not seating flush. Reshape mounting feet.
Smooth leader surface and trapeze.
Repair both bellows mounting holes (both stripped) previous large screws used. Fill and retap.
Right bellows wire too long. Make new wire.
Clean door hinge up. Old oil making door close sluggishly. Smooth corner of hinge out.
Adjust hammer and gong correctly. Hammer bent inappropriately and gong clocked incorrectly. ($120 for all)
TOTAL : $365